0Comment

Concrete Estimating Services | Construction Cost Estimator Company In New York

How to calculate concrete:

  • Determine how thick you want the concrete.
  • Measure the length and width that you’d like to cover.
  • Multiply the length by the width to determine square footage.
  • Convert the thickness from inches to feet.
  • Multiply the thickness in feet by the square footage to determine cubic feet.

How much does a 30×30 concrete slab cost?

How much is the cost of a 30×30 concrete slab? A 30×30 foot concrete slab costs about $5,400 including installation. This is for 6-inch thickness, but can go up or down depending on what your concrete pro recommends.

Cost Estimating Service Inc. | LinkedIn

           Call us +1   703-659-8010         /  Email:  [email protected]

How much does a cubic foot of concrete cost?

The average cost of concrete is $119 to $147 per cubic yard, which includes delivery up to 20 miles. Pouring plain concrete costs $5 to $10 per square foot depending on the quality, while colored, stamped, or stained concrete costs $8 to $18 per square foot to install.
Concrete Estimating Spreadsheets & Software - SITEEST.COM

How much is concrete per square yard?

How much is a yard of concrete? When estimating the cost of concrete, use $125 per yard as a ballpark figure. However, concrete prices differ by region, and you’ll have to pay a ready mix delivery fee, plus factor in labor charges if hiring a contractor. Get quotes from concrete contractors near me.

Concrete Estimating

Students will learn to accurately estimate concrete costs. Using a real set of drawings, students will perform a complete concrete takeoff and will apply material and labor costs to that takeoff to assemble a complete estimate. Students will leave this class with the knowledge needed to produce accurate concrete estimates using efficient and reliable estimating techniques.

  • Get acquainted with concrete
  • Concrete terminology
  • Categories of concrete costs
  • General costs for;  Concrete, Placing, Reinforcing, Finishing, Equipment
  • Essential forms and documentation
  • Takeoff quantities of work
  • Slabs on grade problems
  • Footers and pads
  • Utilize a cost data manual
  • Shrinkage and temperature reinforcement
  • Horizontal forming
  • Forming costs-job built
  • Reinforcing costs for;  Footers/pads, Pile caps, Piers/pilasters/columns, Walls/beams, Slabs/wire or fiber fabric
  • Tilt-up systems
  • Pre-cast concrete
  • Manufactured forming systems
  • Discussion on; Hot and cold weather concrete, Admixtures, Chemical sealers, compounds, Form releases, hardener
  • Introduction to computerized takeoff and estimating
  • Prepare a concrete bid

Traditional Concrete Visualization & Estimation Methods:

  • Estimating slab in cubic feet: multiply the length by the width by the depth of the desired slab in inches, then divide by 1728 to calculate the slab’s total cubic feet (don’t forget to add ten percent to adjust for variations and waste)
    • For cubic yards: follow the steps above and divide by 27
  • Visualizing a cubic yard: Imagine a 9’ x 9’ slab at 4” deep, or approximately five sidewalk squares
    • 1 cubic yard of concrete placed at 4-inches deep will cover 81 square feet
    • one pallet of 56, 60-pound bags of Sakrete mix is roughly one cubic yard of concrete (considering waste: add about 4 additional bags are of 60-pound mix for full cubic yard)

How much concrete do I need for a 10×10 slab

To determine the how much concrete do I need for a 10×10 slab solve in following steps:-

Step 1 :- calculate the volume in cubic feet:- we have given 10×10 slab (length × width), consider it is 4 inch thick, 4 inch = 0.33 feet, to determine the volume of slab, you need to multiply all dimensions, such that = 10′ × 10′ × 0.33′ = 33 cubic foot.

Step 2 :- converting cubic feet into cubic yard:- now converting into cubic yard, you should divide it by 27, because 1 cubic yard = 27 cubic foot, so volume of concrete you needed for 10 × 10 slab 4 inch thick in cubic yard = 33/27 = 1.23.

Step 3 :- Add 10% extra :- considering extra 10% wastage during mixing and pouring, so 10% of 1.23 cubic yard = 0.123, add 1.23 + 0.122 = 1.35 cubic yard.

How much concrete do I need for a 10×10 slab

Regarding this, “how much concrete do i need for a 10×10 slab?”, generally you will need 1.23 cubic yards of premixed concrete for a 10×10 slab at 4 inches thick, at 5 inches thick you will need 1.54 cubic yards of concrete and at 6 inches thick – 1.85 cubic yards of concrete. Always you should purchase 5 to 10% more premixed than required.

4″ thick slab of 10×10 is ideal in normal load or standard condition for making sidewalks, curbs, steps, ramp, walkway and patio and 5 inch or 6 inch thick slab is ideal for heavy load and heavy traffic

Cast-in-Place Concrete Cost Estimating - Emerald Group Learning

How many yards of concrete do I need for a 10×10 slab

One may ask a reasonable question, “how many yards of concrete do I need for a 10×10 slab?”, generally there are 1.23 cubic yards of premixed concrete you will need for a 10×10 slab at 4 inches thick, at 5 inches thick you will need 1.54 cubic yards of concrete and at 6 inches thick – 1.85 cubic yards of concrete.

How many cubic feet of concrete do I need for a 10×10 slab?

One may ask a reasonable question, “how many cubic feet of concrete do I need for a 10×10 slab?”, generally there are 33.21 cubic feet of premixed concrete you will need for a 10×10 slab at 4 inches thick, at 5 inches thick you will need 41.58 cubic feet of concrete and at 6 inches thick – 49.95 cubic feet of concrete.