How do I estimate the cost of a paved driveway?

For the simplest estimate, you can use this formula.

1. Length x width=Square footage of the driveway.
2. Driveway sq ft x $3= low end cost.
3. Driveway sq ft x 7= high end cost.
4. Driveway sq ft x $2= low end cost.
5. Driveway sq ft x $4= high end cost.
6. When to reseal your driveway:
7. When to repave your driveway:

How much does it cost to pave per square foot?

Asphalt paving costs $7 to $13 per square foot. You’ll pay $2 to $6 per square foot for new materials and $5 to $7 per square foot for installation.

Asphalt Paving Cost Per Square Foot.

Material	Cost Per Square Foot
Asphalt	$1 – $5
Gravel	$0.50 – $1
Installation	$5 – $7
Total	$7 – $13

How much does it cost to pave 1000 square feet?

Project Total: The average Southern California driveway is approximately 1,000 sq. ft. Brick driveway paving cost on a space that size will typically come in at around $8,500, with removal of the old driveway, base and paving stone installation.

Is it cheaper to lay concrete or pavers?

As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.

Is asphalt the same as blacktop?

The materials that are used to make blacktop and asphalt are the same. Both are made from two ingredients: bitumen and crushed stone. The difference lies in how those ingredients are combined to make the final product.

How much does a 20×20 paver patio cost?

A 20×20 brick paver patio costs $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor runs $6 to $11 per square foot. Get free estimates from masonry contractors near you or view our cost guide below.

 How long should I stay off the new asphalt?

Normally, 24-hours is all that is required to use your new asphalt surface. In very warm weather, we recommend staying off the fresh asphalt for 1 – 2 days, as the surface cools.

What lasts longer concrete or pavers?

Pavers can last up to 50 years, in part because individual tiles are easy to replace with minimal dint to the wallet. Slab and stamped concrete can last as long as 25 years.

Key Points When Choosing Decking or Paving

Decking is more affordable, quicker to install but doesn’t last very long. Paving slabs can be pricier, take longer to install but require little-to-no maintenance and will last for a long time.

Less Expensive: –  Concrete pavers are less expensive than brick, due to the lower cost of raw materials. More Choice: Concrete offers far more design and color options than brick. …

Easier to Install: Concrete pavers are precisely uniform and easier to cut, so they’re a popular choice for DIY projects.