Drywall Installation Cost Estimation including the finishing, taping, labor costs, and materials, is between average $1.50 to $3 per square foot. In addition, We provide drywall installation services to contractors. Our cost-estimating team has expert contractors in the USA. Hence, our complete drywall cost estimation chart is available with prices.
| Room | Average cost |
|---|---|
| 5×8 Bathroom | $500 – $1,000 |
| 12×12 Bedroom | $600 – $2,000 |
| 12×20 Master bedroom | $900 – $2,900 |
| 16×20 Living room | $1,000 – $3,500 |
| 20×20 Garage | $1,300 – $4,300 |
| 1,000 SF Basement | $1,800 – $8,500 |
| 1,500 SF Whole house | $7,000 – $23,000 |
| 2,000 SF Whole house | $10,000 – $35,000 |
| 2,500 SF Whole house | $13,000 – $40,000 |
| 3,000 SF Whole house | $18,000 – $55,000 |
Average Cost to Drywall a House
The prices in this table are for the cost to drywall a house per square foot for common home and apartment sizes.
It shows Low, Medium and High ranges. Each range is explained beneath the table.
| Average Cost to Drywall a House by House Size | |
| Cost to Drywall a 1000 sq ft House | Total Cost |
| Low x 3600 square feet | $5,500 |
| Average x 4140 | $9,500 |
| High x 4700 | $15,900 |
| Cost to Drywall a 1500 sq ft House | |
| Low x 5500 square feet | $8,500 |
| Average x 6325 | $12,800 |
| High x 7250 | $17,900 |
| Cost to Drywall a 2000 sq ft House | |
| Low x 8100 square feet | $12,000 |
| Average x 9355 | $22,000 |
| High x 10450 | $35,000 |
| Cost to Drywall a 2500 sq ft House | |
| Low x 9650 square feet | $14,500 |
| Average x 11225 | $25,800 |
| High x 12545 | $42,700 |
| Cost to Drywall a 3000 sq ft House | |
| Low x 11160 square feet | $17,000 |
| Average x 12840 | $28,900 |
| High x 14500 | $48,800 |
How much should drywall cost?
The average price of drywall and sheetrock is $17 per four-foot by eight-foot panel. The prices can range from $15-$24 per panel depending on where you live and where you are purchasing from. This translates into a cost of about $0.50-$0.80 per square foot of drywall.
How much does drywall cost to hang and finish?
Drywall installation costs $2 to $4 per square foot, depending on the ceiling height, drywall type, and level of finish. Drywall costs $0.50 to $0.80 per square foot for materials. The labor cost to hang and finish drywall is $1.50 to $3 per square foot. The cost to drywall a 12×12 room is $600 to $2,000
Why is drywall so expensive?
There are a bunch of reasons drywall prices can rise. As with most commodities, increased demand or decreased supply can have an affect on drywall board prices.
What’s the difference between drywall and sheetrock?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.
Should you install flooring or drywall first?
When you’re hanging drywall and installing new flooring, it’s usually best to hang the drywall first and then save the floor for last.
Should you tile floor before drywall?
From a hands-on perspective bear in mind if you tile first you’ll need to keep the tile covered while you mud and if you drywall first make sure you remove any lumps of compound that fall on the floor so your tiling surface stays flat.
Can you tile floor before drywall?
Sheetrock should be up, second coat taped, sanded, and preferrably atleast primed, if not painted, prior to installing the floor tile. … All that should be left when the tile floor goes in is to install the wood base. Even the door trim should be in already (just undercut it for the tile). When in doubt, follow gravity!